Exor’s 25.four x 25.4mm, prolonged temp “NanoSOM nS02” module runs real-time Linux and its XPlatform industrial IoT software program on a soldered, 800MHz STM32MP157 with as much as 1GB DDR3L and 32GB eMMC. An “OpenHMI nS02” dev package with 5-inch touchscreen is optionally available.
Italian embedded know-how agency Exor Embedded has launched a NanoSOM nS02 module that runs real-time Linux on the brand new 800MHz model of ST’s dual-core, Cortex-A7 based mostly STM32MP157. As with the latest, Apollo Lake based mostly, FPGA-enabled GigaSOM GS01 module, Exor introduced the product with Arrow, which will probably be distributing the module and an OpenHMI nS02 Improvement Equipment (see farther under).
NanoSOM nS02 and block diagram
(click on photos to enlarge)
The IoT-oriented, 25.four x 25.four x 3mm NanoSOM nS02 is a bit bigger than Octavo’s 18 x 18mm OSD32MP15x SiP module based mostly on the identical 800MHz STM32MP157, which additionally features a 3D GPU and a Cortex-M4 core. The nS02 has the identical dimensions as Kontron’s SOM-STM32MP157 and it edges out Ka-Ro’s 27 x 27mm QSMP.
NanoSOM nS02, back and front
(click on picture to enlarge)
Exor presents a BSP with Yocto Undertaking code and an OSADL Actual-time Linux (or Linux RT) kernel. Optionally, you possibly can run Exor’s XPlaform software program, which incorporates its JMobile industrial automation suite, embedded Open HMI GUI software program, and Corvina Cloud IIoT Platform with MQTT and OPC-UA interfaces and connectivity for telemetry, distant help, and OPEN-VPN. XPlatform additionally consists of an IEC61131 CODESYS or EXOR xPLC runtime.
The module ships with safe boot and TrustZone assist and is accessible with an optionally available, hardware-enabled safety answer. The safety add-on consists of digital rights administration, encryption, and safe obtain know-how,
The NanoSOM nS02 is supplied with as much as 1GB DDR3L and as much as 32GB eMMC. Commonplace configurations are 256MB or 512MB with 4GB eMMC or 1GB with 8GB eMMC.
Twin 10/100 Ethernet ports are supported by way of a MAC and a Direct Line Interface. A Microchip LAN9512 controller helps the LAN, in addition to 2x USB 2.zero host and a single USB OTG interface.
The module permits shows by way of a 24-bit RGB LCD parallel or 2-lane MIPI-DSI interfaces and there’s an as much as 12-bit digicam enter. Different interfaces embody 2x SD, 4x SPI, 4x UART, 2x CAN, and single I2C and I2S. You additionally get 5x GPIO and varied analog inputs.
The NanoSOM nS02 has a 3.3V enter, battery and superCAP assist, a watchdog, RTC, voltage monitoring, and JTAG. The module helps zero to 70°C temperatures and presents 10-year availability.
OpenHMI nS02 package
In keeping with the announcement on Digital-Lab, Arrow will present a improvement package for the module. The CNXSoft report that alerted us to the nS02 notes mentioned the package was not but accessible, however would possibly finally seem on this Arrow buying web page which presents a package that helps an earlier NanoSOM nS01 module with an i.MX6ULL SoC.
OpenHMI nS02 Improvement Equipment and block diagram
(click on photos to enlarge)
But, Exor, mentions a 5” OpenHMI nS02 Improvement Equipment and we seen that we had linked to that product web page in our earlier, June eight GigaSOM GS01 report. Based mostly on the sooner package for the nS01, the OpenHMI nS02 combines a baseboard with a 5-inch 800 x 480 PCAP touchscreen.
The OpenHMI nS02 package supplies a microSD slot, WiFi, twin 10/100 LAN ports, twin USB host ports, and micro-USB OTG and micro-USB serial debug ports. Different options together with CAN and serial interfaces may be seen within the block diagram above.
The NanoSOM nS02 is accessible at an undisclosed worth. Extra info could also be present in Exor’s NanoSOM nS02 and OpenHMI nS02 Improvement Equipment product pages.
fedora 31 server install,fedora 31 download,server world fedora 31,fedora 31 tutorial,server world centos 8,server world centos 7,server world ubuntu,server info